x
Paylaş:
Fiyat Alarmı
WAVESHARE

CP2102 USB UART Board (Type C), USB To UART (TTL) USB-C Connector

Ürün Kodu : LTE-WS20644
Yorumlar
292,60 TL + KDV
Stok Durumu:
Var (2 Adet)

Not
:
Aynı Gün Kargo 15’e kadar aynı gün kargo
Worldwide Shipment
Next Day Shipment
Kampanya

{{CMP.TITLE}}

{{CMP.DESCRIPTION}}

  • Ürün Özellikleri
  • İade ve Teslimat
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Beni Ara
  • Ek
  • CP2102 USB To UART (TTL) Communication Module, USB-C Connector
    CP2102 USB-C To UART Module

    Adopts CP2102, Compatible With 3.3V Logic Level

    Features At A Glance
    • Supports Mac OS, Linux, Android, WinCE, Windows 7/8/10/11...
    • Voltage output support: 5V or 3.3V
    • Integrated USB protection device: SP0503
    • 3x LED indicators: TXD LED, RXD LED, POWER LED
    • Pins accessible on pinheaders: TXD, RXD, RTS, CTS
    • Other pins are accessible on drilled holes, easily connected to user application system (the pin pitch is compatible with universal prototype board)
    CP2102 Solution
    • Single-Chip USB to UART Data Transfer
      • No external resistors required, no external crystal required
      • On-chip power-on reset circuit and voltage regulator
      • Integrated 1024-Byte EEPROM
    • USB Function Controller
      • USB Specification 2.0 compliant; full-speed (12 Mbps)
      • USB suspend state, supported via SUSPEND pins
    • UART
      • All handshaking and modem interface signals
      • Data formats:
        • Data bits: 5, 6, 7, 8
        • Stop bits: 1, 1.5, 2
        • Parity: odd, even, no parity
      • Baudrates: 300bps to 1Mbps
      • 576 byte receiving buffer; 640 byte transmitting buffer
      • Hardware or X-On/X-Off handshaking support
      • Event character support
    • Virtual COM Port Device Drivers
      • Windows 8/7/Vista/Server 2003/XP/2000
      • MAC OS-X/OS-9
      • Linux 2.40 or higher
    • USBXpress Direct Driver Support
      • Windows 7/Vista/Server 2003/XP/2000
      • Windows CE
    • Temperature Range
      • –40 to +85 °C
    Hardware Connection

    In The Case Of Working With MCU

    • VCCIO: 3.3V or 5V output (the module is powered from USB, and the onboard jumper should be shorted to 3.3V or 5V)
    • GND: connects to GND
    • TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)
    • RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
    • RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)
    • CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)
    CAUTION: the module is compatible with TTL level ONLY, to avoiding any damage, please DON'T direct connect it to RS232 circuit.
    Outline Dimensions
    Resources & Services
    Wiki: CP2102_USB_UART_Board_(Type_C)
Sepete Ekle
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.