x
Paylaş:
WAVESHARE

FT232RNL USB TO RS232/485/422/TTL Interface Converter, Industrial Isol

Ürün Kodu : LTE-WS23996
Yorumlar
1.130,69 TL + KDV
Stok Durumu:
Yok
Not
:
Aynı Gün Kargo 15’e kadar aynı gün kargo
Worldwide Shipment
Next Day Shipment
Kampanya

{{CMP.TITLE}}

{{CMP.DESCRIPTION}}

  • Ürün Özellikleri
  • İade ve Teslimat
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Beni Ara
  • Ek
  • FT232RNL USB TO RS232/485/422/TTL Interface Converter, Industrial Isolation
    Industrial Grade Isolated USB Converter

    USB TO RS232/485/422/TTL

    Original FT232RNL | Stable Transmission | Multiple Devices Applicable | Multi-OS Compatible

    Features At A Glance
    • Adopt original FT232RNL chip, fast communicating, stable and reliable, better compatibility
    • Supports multiple communication interface conversion: USB to RS232, USB to RS485, USB to RS422, USB to TTL
    • Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
    • Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
    • Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection
    • Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
    • Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering with each other
    • Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch
    • 3 LEDs for indicating the power and transceiver status
    • High quality USB-B and RS232 connectors, smoothly plug/pull
    • Industrial grade metal case, supports wall-mount and rail-mount installations, solid and beautiful, easy to install
    Specifications
    PRODUCT TYPE Industrial grade digital isolated converter
    USB Operating voltage 5V
    Connector USB-B
    Protection 200mA self-recovery fuse, isolated output
    RS232 Connector DB9 male
    Protection TVS diode, surge protection & ESD protection
    Transmission mode Point-to-point
    Baud rate 300bps ~ 3Mbps
    RS485/422 Connector Screw terminal
    Direction control Hardware automatic control
    Protection 600W lightningproof and surge-suppress, 15KV ESD protection (reserved two 120R balancing resistors, enabled/disabled via jumper)
    Transmission mode Point-to-multipoints (485 mode: up to 32 nodes, it is recommended to use repeaters for 16 nodes or more; 422 mode: up to 256 nodes, it is recommended to use repeaters for 16 nodes or more)
    Baud rate 300bps ~ 3Mbps
    TTL (UART) Operating voltage 3.3V / 5V
    Connector Screw terminal
    Pins TXD, RXD, GND, 5V/3.3V
    Protection clamp protection diode, over-voltage/negative-voltage proof, shock resistance
    Transmission mode Point-to-point
    Baud rate 300 bps ~ 3Mbps
    INDICATORS PWR Red power indicator, light up when there is USB connection and voltage is detected
    TXD TX indicator, light up when the USB port sends data
    RXD RX indicator, light up when the device ports send data back
    OPERATING ENVIRONMENT Temperature -15℃ ~ 70℃
    Humidity 5%RH ~ 95%RH
    OPERATING SYSTEM Mac, Linux, Android, Windows 11 / 10 / 8.1 / 8 / 7

    Original Industrial Grade Chip

    Onboard Original FT232RNL Chip,
    Fast Communication, Stable & Reliable, Better Compatibility


    Safer Isolated Design
    • Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
    • Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption

    Multiple Protection, Safe And Stable

    Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance.


    Multi System Support

    Supports Mac, Linux, Android, Windows 11 / 10 / 8.1 / 8 / 7, Etc.

    Aluminium Alloy Enclosure

    Aluminium Alloy Enclosure With Sand Blasting And Anodic Oxidation
    Solid And Durable, Fashionable And Good Hand Feeling
    Wall-Mount And Rail-Mount Support, More Flexible For Industrial Installation

    Interface Introduction
       

    Product Show


    Outline Dimensions
    PACKAGE CONTENT        

    Weight: 0.104 kg

    1. USB TO RS232/485/422/TTL x1
    2. Rail-mount buckle x1
    3. USB type A to type B cable ~1.2m x1
    4. Screwdriver x1
     
    Resources & Services

    * Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Sepete Ekle
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.