x
Paylaş:
M5STACK

4-Channel Analog to 12C 13.2 Module 4-20mA Input(ST32G030)

Ürün Kodu : LTE-M133
Yorumlar
1.697,44 TL + KDV
Stok Durumu:
Yok
Not
:
Aynı Gün Kargo 15’e kadar aynı gün kargo
Worldwide Shipment
Next Day Shipment
Kampanya

{{CMP.TITLE}}

{{CMP.DESCRIPTION}}

  • Ürün Özellikleri
  • İade ve Teslimat
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Beni Ara
  • Ek
  • Description

    AIN4-20mA Module 13.2 is a quad-channel 4~20mA current analog acquisition module. It adopts the STM32G030F6 main control chip and a dedicated acquisition chip with isolation to communicate with the M5 host for i2c communication. Supports switching to internally or externally powered wiring via jumper caps. On-board power isolation chip and built-in op amp circuitry accurately measure external current sensors and ensure signal accuracy and system safety. In terms of power supply, the DC-JACK interface and the corresponding DC-DC boost circuit can provide power to the entire device. 'Suitable for power system equipment monitoring, motor control, energy management and automation, and industrial process control'.

    Features

    • STM32G030F6® 32-bit Cortex®-M0+ CPU
    • I2C communication
    • Support four 2 or 4-wire sensors, jumper cap switching
    • Built-in galvanic isolation chip
    • Support Arduino, UIFlow and other programming platforms

    Includes

    • 1*AIN4-20mA Moudle 13.2
    • 12* jumper cap
    • 5*2.54mm plug-in terminal block

    Applications

    • Power system equipment monitoring
    • Motor control
    • energy management
    • Automation and industrial process control

    Specification

    Resources Parameters
    MCU STM32G030F6(64 Kbytes of Flash/8 Kbytes of SRAM)
    Power isolation chip F2424S-2WR3
    Signal isolation chip HCNR200
    Op amp chip SGM321YC5/TR
    I2C mailing address 0x55
    Operating temperature 0-40°C
    External DC supply voltage 9-24V
    Product Size 54* 54* 13mm
    Package Size 95 * 65 * 25mm
    Product Weight 26.9g
    Package Weight 51.7g


    Schematic

    schematics

    Jumper cap connection and instructions

    • If your current sensor already has an external power supply, the jumper cap is connected as shown on the left
    • If your current sensor does not have an external power supply, connect the jumper cap as shown on the right, and connect the interface of AIN4-20mA Module 13.2 to the appropriate external power supply as needed.
    schematics

    Module Size

    module size

    Examples

    Arduino

    UIFlow

    UIFlow Blocks

    • Init device I2C address
    image
    • Get ADC 16bit raw value
    image
    • Get current value
    image
    • Get device firware version
    image
Sepete Ekle
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.